Mild Conditions Research Articles

Dual channel chemosensor for successive detection of environmentally toxic Pd2+ and CN− ions and its application to cancer cell imaging

BackgroundDetecting and neutralizing Pd2+ ions are a significant challenge due to their cytotoxicity, even at low concentrations. To address this issue, various chemosensors have been designed for advanced detection systems, offering simplicity and the potential to differentiate signals from different analytes. Nonetheless, these chemosensors often suffer from limited emission response and complex synthesis procedures. As a result, the tracking and quantification of residual palladium in biological systems and environments remain challenging tasks, with only a few chemosensing probes available for commercial use. ResultsIn this paper, a straightforward approach for the selective detection of Pd2+ ions is proposed, which involves the design, synthesis, and utilization of a propargylated naphthalene-derived probe (E)-N'-((2-(prop-2-yn-1-yloxy)naphthalen-1-yl)methylene)benzohydrazide (NHP). The NHP probe exhibits sensitive dual-channel colorimetry and fluorescence Pd2+ detection over other tested metal ions. The detection process is performed through a catalytic depropargylation reaction, followed by an excited state intramolecular proton transfer (ESIPT) process, the detection limit is as low as 11.58 × 10−7 M under mild conditions. Interestingly, the resultant chemodosimeter adduct (E)-N'-((2-hydroxynaphthalen-1-yl)methylene)benzohydrazide (NHH) was employed for the consecutive detection of CN− ions, exhibiting an impressive detection limit of 31.79 × 10−8 M. Validation of both detection processes was achieved through 1H nuclear magnetic resonance and density functional theory calculations. For real-time applications of the NHP and NHH probes, smartphone-assisted detection, and intracellular detection of Pd2+ and CN− ions within HeLa cells were studied. SignificanceThis research presents a novel naphthalene derivative for visually detecting environmentally toxic Pd2+ and CN− ions. The synthesized probe selectively binds to Pd2+, forming a chemodosimeter. It successfully detects CN− ions through colorimetry and fluorimetry, offering a low detection limit and quick response. Notably, it's the first naphthalene-based small molecule to serve as a dual probe for toxic analytes - palladium and cyanide. Moreover, it effectively detects Pd2+ and CN− intracellularly in cancer cells.

Access of arylmethanes via iridium-catalyzed deoxygenative cross-coupling of aryl ketones with anilines/phenols

Construction of arylmethanes is one of the forefronts and significant subjects in the field of organic synthesis due to the prevalence of this motifs in pharmaceuticals and biological compounds. Herein, an iridium-catalyzed deoxygenative cross-coupling of aryl ketones with anilines/phenols was established to synthesize diverse collections of arylmethanes. This process generates benzyl carbocationic intermediates from a wide range of aryl ketones, which were captured with anilines/phenols to access the corresponding arylmethanes under mild conditions. The fluorene compounds were also successfully afforded using ortho-substituted aryl ketones as inputs via intermolecular deoxygenative cross-coupling. This method is viable for applications in cross-coupling of complex bioactive molecules and drugs by this iridium-catalyzed deoxygenative cross-coupling process.

Research Progress on Removal of Oxygenates in Fischer-Tropsch Oil by Adsorption

The oxygen-containing compounds in Fischer Tropsch synthetic oil greatly affect the downstream deep processing of hydrocarbons, and effective removal is required. Compared to traditional removal technologies such as hydrogenation deoxygenation, solvent extraction, and extraction distillation, adsorption deoxygenation technology has the advantages of low cost, mild operating conditions, easy removal and recovery, and minimal impact on oil quality. Therefore, adsorption deoxygenation technology has devel‐ oped rapidly in various removal processes and has become a research hotspot in the current Fischer Tropsch oil deoxygenation. Adsorbents are the core of adsorption deoxygenation technology. Therefore, this article briefly introduces the adsorption mechanism and summarizes the research progress of adsorbents widely used in recent years, such as silica gel, alumina, molecular sieves, and metal organic frameworks, in adsorbing oxygen-containing compounds in Fischer Tropsch synthetic oils. And provide reference suggestions for further adsorption and deoxygenation directions in the future.

Trivalent Phosphine-Catalyzed [4+1] Spiro-annulation Reaction Using Allenyl Imide and Methylene Cyclocompounds.

The trivalent phosphine-catalyzed [4+1] spiro-annulation reaction of allenyl imide and activated methylene cyclocompounds has been developed for the construction of various spiro-2-cyclopenten-1-ones. Oxindoles, 3-isochromanones, and 2-indanones are selected as 1C synthons to capture the in situ-generated bis-electrophilic α,β-unsaturated ketenyl phosphonium intermediate, affording the corresponding monospiro- and bispiro-cyclopentenones in good to excellent yields (≤91%) under mild conditions. The primary attempt at asymmetric catalysis using monophosphine (R)-SITCP provides promising enantioselectivity (45% ee). A plausible reaction mechanism is also proposed.

Fine-Tuning Electron-Donor Capability in the Basic Anion of Poly(ionic liquid) Frameworks for Revolutionizing Catalytic Synthesis of Ethyl Methyl Carbonate with Both Ultrahigh Catalytic Activity and Selectivity.

Ethyl methyl carbonate (EMC) is a crucial solvent extensively utilized in lithium-ion battery electrolytes; the transesterification of dimethyl carbonate (DMC) with ethanol is a pivotal reaction for EMC production. However, this reaction faces challenges due to the trade-off between catalytic activity and selectivity from the basic catalysts. In this issue, we report an innovative strategy through fine-tuning the electron-donor capability of the basic phenolate anion ([PhO]) in a novel poly(ionic liquid) (PIL) framework, as synthesized via an alkylation reaction between 1,3,5-tris(bromomethyl)benzene, biphenyldiimidazole, and N,N'-carbonyldiimidazole (CDI) to trigger targeted basicity that can directionally catalyze the transesterification of DMC with ethanol, so as to achieve both ultrahigh catalytic activity and selectivity toward EMC. By varying the substituent groups with electron-withdrawing and electron-donating effects on the phenolate anion, the PILs show expected changes in the catalytic performance, following well with the trend of charge density on these substituted phenolate anions. The optimized catalyst [CPIL-CDI][MeOPhO], induced by p-methoxyphenolate anions, allows an extraordinary EMC yield of 72.19% and an EMC selectivity of 91.48% under mild conditions without any process intensifications, suppressing all of the reported catalysts reported to date. Outcomes and approaches shown in this work have the potential to expedite the systematic design of cations and anions within PILs for industrial-scale EMC production through environmentally friendly transesterification processes.

Catalyst- and base-free visible light-enabled radical relay trihalomethylation/functional group-migration/carbonylation with CX3SO2Cl.

Herein, we report a visible light-enabled radical trihalomethylation/cyano-migration/carbonylation cascade reaction of 2-hydroxy-2-hex-5-enenitrile with CX3SO2Cl as the CX3-source (X = F, Cl) to obtain 5-oxo-2-(2,2,2-trihaloethyl)pentanenitrile compounds in the absence of a photocatalyst, transition metal and base. This reaction system is also effective to convert (benzo[d]thiazol-2-yl)-pent-4-enol to the corresponding 4-(benzo[d]thiazol-2-yl)-6,6,6-trihalo-hexanone products. These reactions occur under mild conditions, tolerate a wide range of functional groups, and provide alternative approaches for the 1,2-bifunctionalization reaction of unactivated olefins.

Electrochemical Asymmetric Radical Functionalization of Aldehydes Enabled by a Redox Shuttle.

Aminocatalysis is a well-established tool that enables the production of enantioenriched compounds under mild conditions. Its versatility is underscored by its seamless integration with various synthetic approaches. While the combination of aminocatalysis with metal catalysis, photochemistry, and stoichiometric oxidants has been extensively explored, its synergy with electrochemical activation remains largely unexplored. Herein, we present the successful merger of electrochemistry and aminocatalysis to perform SOMO-type transformations, expanding the toolkit for asymmetric electrochemical synthesis. The methodology harnesses electricity to drive the oxidation of catalytically generated enamines, which ultimately partake in enantioselective radical processes, leading to α-alkylated aldehydes. Crucially, mechanistic studies highlight how this electrochemical strategy is enabled by the use of a redox shuttle, 4,4'-dimethoxybiphenyl, to prevent catalyst degradation and furnishing the coveted compounds in good yield and high enantioselectivity.

Synthesis of Acyl Cyclopentaquinolinones through Simultaneous Construction of the Heterocyclic Scaffold and Introduction of the Acyl Group.

Presented herein is an effective and concise synthesis of acyl cyclopentaquinolinone derivatives via the cascade reactions of N-(o-ethynylaryl)acrylamides with α-diazo carbonyl compounds. The formation of product involves a visible light-induced radical formation from α-diazo carbonyl compound followed by its addition onto the acrylamide moiety to trigger double radical annulation, single-electron oxidation, and β-elimination. To our knowledge, this is the first example in which the cyclopentaquinolinone scaffold was constructed along with the introduction of an acyl group under visible light irradiation conditions. Compared with literature methods for similar purpose, this newly developed protocol has advantages such as readily accessible substrates, mild reaction conditions, valuable products, concise synthetic procedure, and high sustainability. With all these merits, this method is expected to find wide applications in the construction of related acyl heterocyclic skeletons.

Visible-Light-Photocatalyzed C5-H Nitration of 8-Aminoquinoline Amides

A mild and efficient protocol for visible-light-photocatalyzed C5 nitration of 8-aminoquinoline derivatives was developed utilizing Cu(NO3)2∙3H2O as a nitro source. The reaction proceeded smoothly under very mild conditions, employing Acid Red 94 and a commercial household light bulb as an organic photosensitizer and a light source, respectively, making this synthetic procedure green and easy to operate. Furthermore, most products could be obtained through recrystallization, which enhanced the operational simplicity of this method.

Zn[L-proline]2 as an Efficient Catalyst for the Synthesis of Dihydro Pyrano Thiazole Derivatives via Cycloaddition Reaction in Aqueous Medium

Abstract: In the current study, a zinc-linked amino acid complex was successfully synthesized as an efficient and recoverable catalyst for the synthesis of dihydro pyrano thiazole derivatives via the reaction of an aromatic aldehyde with malononitrile and rhodanine in one-pot, three-component reaction under green conditions. The structures of the new compounds were elucidated by elemental and spectral analyses. Environmental friendliness, low cost, operational simplicity, extensive reusability and applicability, and easy recovery of the catalyst using simple methods are the critical features of this methodology. Moreover, a series of dihydro pyrano thiazole derivatives were synthesized. This new procedure has presented remarkable advantages in terms of safety, simplicity, stability, mild conditions, short reaction time, excellent yields, and high purity without using any hazardous solvents.

Cyclopropanation of Aryl and Styryl Acetonitriles With Selenium‐Based Dielectrophiles.

Efficient cyclopropanation reactions of aryl or styrylacetonitriles with vinyl selenones under mild conditions were described. By this approach, synthetically challenging 1‐vinylcyclopropane‐1‐carbonitriles were accessible in good yields. This methodology features the advantage of operational simplicity, broad substrate scope, good functional group tolerance, transition‐metal‐free conditions, mild temperature, and a high level of regio‐ and diastereo‐control.

The Application of Porous Organic Polymers as Metal Free Photocatalysts in Organic Synthesis.

Concerns about increasing greenhouse gas emissions and their effect on our environment highlight the urgent need for new sustainable technologies. Visible light photocatalysis allows the clean and selective generation of reactive intermediates under mild conditions. The more widespread adoption of the current generation of photocatalysts, particularly those using precious metals, is hampered by drawbacks such as their cost, toxicity, difficult separation, and limited recyclability. This is driving the search for alternatives, such as porous organic polymers (POPs). This new class of materials is made entirely from organic building blocks, can possess high surface area and stability, and has a controllable composition and functionality. This review focuses on the application of POPs as photocatalysts in organic synthesis. For each reaction type, a representative material is discussed, with special attention to the mechanism of the reaction. Additionally, an overview is given, comparing POPs with other classes of photocatalysts, and critical conclusions and future perspectives are provided on this important field.

Visible-Light-Promoted Deoxygenative Alkylation of Quinoxalin-2(1H)-ones with Activated Alcohols.

A one-pot strategy for deoxygenative alkylation of alcohols with quinoxalin-2(1H)-ones was developed by using xanthate salts as alcohol-activating groups for radical generation in the presence of tricyclohexylphosphine under visible-light-promoted conditions. The remarkable features of this reaction include a broad substrate scope, excellent functional group tolerance, mild conditions, and simple operation. Moreover, the synthetic utility of this reaction was validated by the success of two-step one-pot reactions, scale-up synthesis, and chemoselective radical monodeoxygenation of diols.

Optimizing CO2 Adsorption/Desorption via the Coupling of Imidazole and Carbon Nanotubes Paper for Spontaneous CO2 Uptake from Ambient Air and Solar‐Driven Release

AbstractDirect air capture (DAC) is a sustainable technology to alleviate the greenhouse effect and a reliable pathway to acquire inexhaustible CO2 for the production of costly chemicals and energy products. Current DAC technologies with amine‐related sorbents rely on chemisorption, while they consume intensive energy for CO2 release and sorbent regeneration by heating. Developing new DAC processes with weak, reversible adsorption can substantially reduce the regeneration energies. Herein, the design of CO2 breathing paper (CBP) is demonstrated toward spontaneous CO2 extraction from ambient air and solar‐driven regeneration. The CBP is fabricated by coupling 2‐ethyl‐4‐methylimidazole to carbon nanotube paper on the basis of density functional theory calculations. At ambient conditions, CBP spontaneously captures atmospheric CO2 with a capacity of 0.14–1.75 mmol g–1 at 0–35 °C through non‐covalent electrostatic interaction. Upon exposure to sunlight, all adsorbed CO2 can be released and converted to concentrated gas for storage. Attractively, the efficiency of solar‐driven CO2 release is much higher than the traditional temperature‐swing method owing to the IR sensitivity of CO2. Besides the reversibility, the mild conditions also ensure the durability of CBP. These findings suggest that the CBP is a promising candidate for cost‐effective DAC.

Selective Hydrofunctionalization of Alkenyl Fluorides Enabled by Nickel-Catalyzed Hydrogen Atoms and Group Transfer: Reaction Development and Mechanistic Study.

Due to the unique effect of fluorine atoms, the efficient construction of high-value alkyl fluorides has attracted significant interest in modern drug development. However, enantioselective catalytic strategies for the efficient assembly of highly functionalized chiral C(sp3)-F scaffolds from simple starting materials have been underutilized. Herein, we demonstrate a nickel-catalyzed radical transfer strategy for the efficient, modular, asymmetric hydrogenation and hydroalkylation of alkenyl fluorides with primary, secondary, and tertiary alkyl halides under mild conditions. The transformation provides facile access to various structurally complex secondary and tertiary α-fluoro amide products from readily available starting materials with excellent substrate compatibility and distinct selectivity. Furthermore, the utility of this method is demonstrated by late-stage modifications and product derivatizations. Detailed mechanistic studies and DFT calculations have been conducted, showing that the rate-determining step for asymmetric hydrogenation reaction is NiH-HAT toward alkenyl fluorides and the stereo-determining step is alcohol coordination to Ni-enolates followed by a barrierless protonation. The mechanism for the asymmetric hydroalkylation reaction is also delivered in this investigation.

Transfer Hydrogenation of Vinyl Arenes and Aryl Acetylenes with Ammonia Borane Catalyzed by Schiff Base Cobalt(II) Complexes

A series of bench-stable Co(II) complexes containing hydrazone Schiff base ligands were evaluated in terms of their activity and selectivity in carbon-carbon multiple bond transfer hydrogenation. These cobalt complexes, especially a Co(II) precatalyst bearing pyridine-2-yl-N(Me)N=C-(1-methyl)imidazole-2-yl ligand, activated by LiHBEt3, were successfully used in the transfer hydrogenation of substituted styrenes and phenylacetylenes with ammonia borane as a hydrogen source. Key advantages of the reported catalytic system include mild reaction conditions, high selectivity and tolerance to functional groups of substrates.

Phosphoric Acid Catalyzed N-Addition/ C-Addition Reaction of 3-Vinyl Indoles with Pyrazole/Pyrazolone to Construct Pyrazole-Substituted 3-(1-Heteroarylethyl)-indole Scaffolds.

Developing a highly efficient atom-economic method for the preparation of 3-(1-heteroarylethyl)-indole scaffolds is of significant value in pharmaceutical and agricultural chemistry. Herein, a phosphoric acid-catalyzed N-addition reaction of 3-vinyl indoles with pyrazoles and C-addition reaction of 3-vinyl indoles with pyrazolones were developed. A series of pyrazole-substituted 3-(1-heteroarylethyl)-indole scaffolds were synthesized in excellent yields (up to 99% yield) under mild reaction conditions. A reasonable reaction mechanism was proposed to explain the experimental results.

Reductions of Arenes using a Magnesium-Dinitrogen Complex.

In this contribution, we present "Birch-type", and other reductions of simple arenes by the potassium salt of an anionic magnesium dinitrogen complex, [{K(TCHPNON)Mg}2(μ-N2)] (TCHPNON = 4,5-bis(2,4,6-tricyclohexylanilido)-2,7-diethyl-9,9-dimethyl-xanthene), which acts as a masked dimagnesium(I) diradical in these reactions. This reagent is non-hazardous, easy-to-handle, and readily provides access to 1,4-cyclohexadiene reduction products under relatively mild reaction conditions. This system works effectively to reduce benzene, naphthalene and anthracene through magnesium-bound "Birch-type" reduction intermediates. Cyclohexadiene products can be subsequently released from the magnesium centres by protonolysis with methanol. In contrast, the reduction of substituted arenes is less selective and involves competing reaction pathways. For toluene and 1,3,5-triphenylbenzene, the structural authentication of "Birch-type" reduction intermediates is conclusive, although the formation of corresponding 1,4-cyclohexadiene derivatives was low yielding. Reduction of anisole did not yield an isolable "Birch-type" intermediate, but instead gave a C-O activation product. Treating triphenylphosphine with [{K(TCHPNON)Mg}2(μ-N2)] resulted in the extrusion of both biphenyl and dinitrogen to afford a magnesium(II) phosphanide [{K(TCHPNON)Mg(μ-PPh2)}2]. Reduction of fluorobenzene proceeded via C‒F activation of the arene, and isolation of the magnesium(II) fluoride [{K(TCHPNON)Mg(μ-F)}2]. Finally, the two-electron reduction of 1,3,5,7-cyclooctatetraene (COT) with [{K(TCHPNON)Mg}2(μ-N2)] yielded a complex, [{K(TCHPNON)Mg}2(μ-COT)], incorporating the aromatic dianion (COT2-).

Transition-Metal- and Photocatalyst-Free Photoinduced Formation of Carbon–Pnictogen (–N, –P) Bonds

AbstractPnictogens, classified within group 15 elements, play a pivotal role in the constitution of a diverse array of drug molecules, natural products, and functional materials. Recent research has increasingly prioritized the exploration of mild conditions for synthesizing C–Pnictogen (C–N and C–P) bonds, highlighting a growing emphasis on efficient and sustainable synthetic methodologies. This Short Review explores fundamental mechanisms, addresses constraints, and assesses diverse methodologies, underscoring the potential of photocatalyst- and transition-metal-free photochemical reactions in advancing sustainability. Divided into two segments, it encompasses recent advancements in reactions facilitating C–N and C–P bond formation.1 Introduction2 Carbon–Nitrogen (C–N) Bond Formation3 Carbon–Phosphorus (C–P) Bond Formation4 Summary and Outlook

TFA-Promoted Cascade Sulfonylation/Rearrangement/Cyclization of 1,5-Diynols and Sodium Sulfinates to Construct Sulfonylated Benzo[b]fluorenes.

A novel conversion of 1,5-diynols into sulfonylated benzo[b]fluorenes is reported by a TFA-promoted cascade cyclization with sodium sulfinates under mild conditions. This strategy provides an efficient and practical approach for accessing various sulfonated benzo[b]fluorenes in moderate to excellent yields under metal-free conditions. On the basis of the control experimental results and density functional theory calculations, a possible cascade transformation mechanism consisting of the dehydration of propargylic alcohols, sulfonylation, allenylation, and Schmittel-type cyclization is proposed. It is worth noting that TFA played an important role in this cascade cyclization, which promoted C-SO2R bond cleavage in a propargylic sulfone intermediate to form allenyl sulfones, followed by Schmittel-type cyclization to give the target product.